How to use CGDI DME DDE ECU Cable

CGDI DME-DDE CG-ECU simulator is a power cable, not only can do ECU test,also with ECU programming function.
It's very easy-to-use:
OBD connection equipment
Connect to 12V power supply
The model port is connected to the corresponding ECU module
Push the palm of the plug, pull it back and push it back

CG-ECU simulator Function:
（1）ECU test
（2）ECU programming
（3）ECU clear
（4）ECU refurbishment
（5）ECU replacement
Support DME-DDE models
MEV9N46(N46)
ME9.7 (272)
MED17.7.X
SIM4LKE
SIM266
DE2.0 SIM271
KE2.0 SIM271
D62M57 (MSV80,MSD80)
CR3.XX
CR4.XX
CR5
CR6/CR60.XX
CRD.11
CRD.2XX

Video demo : How to use CGDI DME-DDE Cable:
CGDI MB Read SIM4LKE ECU with DME DDE cable No soldering
Preparation:
CGDI prog MB key programmer
ECU connecting board DME cable
Mercedes-Benz ECU
Laptop or Desktop
http://blog.obdiitool.co.uk/

How to use BMW AT200 to Read & Write MSV80 ISN and Clone Module

This post comes with the guide to read & write ISN and clone module for MSV80 DME by BMW AT200 ECU programmer.

Before operating, please make sure your AT-200 has been updated to V1.6.1.
And send the serial number of your AT200 to your dealer to update the MSV80 read/ write ISN authorization.

All need:
DME module: BMW MSV80

Computer: Laptop or desktop
Device: BMW AT200 ECU programmer

http://www.obdiitool.co.uk/wholesale/bmw-at200-ecu-programmer.html
MSV80 read & write ISN authorization

http://www.obdiitool.co.uk/wholesale/at200-upgrade-for-bmw-msd80msd81msd85msd87msv80msv90.html

Step-by-step guide:
1.Connect AT200 BMW to computer by USB cable

2.Open AT200 software
Select car brand, model, Engine- EGS and ECU type
Click “Next”

3.Select “Wiring Diagram”
Pay attention to the color of the wiring


4.Then connect AT200 ECU programmer and MSV80 DME via professional ISN OBD cable


5.Click “Identification” to see if the module is communicating

6.Select “Read ISN” to read out MSV80 ISN and copy it

7.Click “Write ISN”
8.Read PFLASH, DFLASH and EXT EEPROM

9.Save the original data

10.Paste ISN and change the ISN to new one

11.Write ISN successfully

12.Read ISN again
The ISN read out is same as the new one

13.Click “Backup data” to replace and clone module

14.Backup data successfully

Done!

SVCI 2020 SVCI 2019 Software FAQ

Here have collected the solutions for problems from SVCI 2020 and SVCI 2019 users. Hope it helps you!

1.BMW DTC database missing
Problem: When I opened the Abrites commender BMW v10.4/v10.5 software with FVDI 2020 device to read DTC functions, an error prompt appeared “Missing DTC database. Install the ABRITUS Common setup”as below in the figure.


Solution: This problem could also be on SVCI 2019. You can solve it by the following steps.
Step 1: Open the FVDI 2020 or FVDI 2019 installation directory
Step 2: Enter "C: Program Files (x86)\Abrites Commander Software List\Common2\" directory and copy BMW folder to "C: Program Files (x86)\Abrites Commander Software List\Common\" directory.

2. mfc110u.dll or others dll files missing
Problem: When I installed SVCI 2020 (SVCI 2019) software and run it, I got trouble in system error, it prompted “The code execution cannot proceed because mfc110u.dll was not found. Reinstalling the program may fix this problem.”

Solution: The reason is that SVCI2020 or SVCI 2019 software some dll files are killed by anti-virus software or some operations are suddenly interrupted during installation.
Here is the method to solve it:
1.Make sure the anti-virus was uninstalled, and then reinstall SVCI2020 or SVCI2019 software or install patch files.
2.Go to patch folder directory( C:\Program Files (x86)\Abrites Commander Software List\Patch). as show in the figure below, and then install these application.

3.Diagnostics license missing
Problem: When I installed the new version FVDI 2019 on my computer, a message appeared “This option is not available in the current version. License missing.”

Solution: Don’t install the new version!  Because the new version SVCI 2019 or SVCI 2020 cannot support the special function currently! But they are still compatible with the old software that used by FVDI 2018 or FVDI2. If you use the old software in the FVDI 2019 or FVDI 2020, the special function will be supported.

Source:http://www.obdiitool.co.uk/service/svci-2020-svci-2019-software-faq.html

VVDI Prog V4.9.0 Update & Free Download

Free download the latest VVDI Prog software V4.9.0.

VVDI Prog V4.9.0 Update (Jan 15^th, 2020)
1.Free download link: https://mega.nz/#!WpQzUarK!wqnhrZ-Opm2UZ7C5fhU6WGip7L5gkd28SkRdsG2xkW0

2.Update info:
* This version don't need update firmware
+ Add VVDI PROG USER MUNUAL 4.9.0 version in Doc folder
+ Add R5F100_Data_8KB_Read_SECURED options in <2-MCU>-><RENESAS-RL78-G13>
+ Add R5F10C/D_Data_8KB_Read_SECURED options in <2-MCU>-><RENESAS-RL78-D1A>
+ Add R5F104_Data_8KB_Read_SECURED options in <2-MCU>-><RENESAS-RL78-G14>
+ Add AXELA options in<4-IMMOBILIZER>-><MAZDA>
+ Add LINGZHI-V5 (2016) options in<5-DASHBOARD>-><SOUTHEAST>
+ Add TRUMPCHI-GS8 (2017) option in<5-DASHBOARD>-><GACMOTOR>
+ Add TIGUAN-L options in<7-AIRBAG>-><VOLKSWAGEN>
+ Add G63-FAS (2019) options in<8-OTHER>-><BENZ>
+ Add G63-FAS-SWITCH (2019) options in<8-OTHER>-><BENZ>
+ Add MED17.7.1 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><BENZ>
+ Add MED17.7.3 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><BENZ>
+ Add EDC17C66 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><BENZ>
+ Add EDC17C10 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><FORD>
+ Add MED17.0.7 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><FORD>
+ Add EDC17CP47 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><GM>
+ Add EDC17CP62 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><HYUNDAI>
+ Add EDC17C57 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><HYUNDAI>
+ Add EDC17C58 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><HONDA>
+ Add MED17.9.3 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><HONDA>
+ Add EDC17CP55 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><JAGUAR>
+ Add MED17.9 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><JAGUAR>
+ Add EDC17C60 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><PEUGEOT>
+ Add EDC17CP42 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><PEUGEOT>
+ Add MED17.4.4 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><PEUGEOT>
+ Add MED17.9.63 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><SUZUKI>
+ Add EDC17C64 (ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><VOLKSWAGEN>

3.The latest V4.9.0 VVDI Prog supports multi-language: English, Chinese, Arabic, Cezch, French, Italian, Polish, Portuguese, Russian, Spanish, Turkish


VVDI prog V4.8.9 updated on Dec. 21^st, 2019:
1.Free download link:  https://mega.nz/#!f9QWgCRS!n9syZDOO7u5KKGNM2poDnu4nKxdgh1aX_R0wwnp4aBA
2.Update info:
* This version don’t need update firmware
+ Add VVDI PROG USER MUNUAL 4.8.9
version in Doc folder
+ Add HYOSOW-S7 in
<4-IMMOBILIZER>-> <BAICMOTOR>
+ Add 820 in
<4-IMMOBILIZER>-> <LIFAN>
+ Add S5 options
in<5-DASHBOARD>-> <HAIMA>
+ Add CROSS options
in<7-AIRBAG>-> <SUZUKI>
+ Add AUDI-Q5-AMP options
in<8-OTHER>-> <AUDI>
+ Add 205-LAMP-RH options
in<8-OTHER>-> <BENZ>
+ Add 330-CABRIOLET-MODULE options
in<8-OTHER>-> <BMW>
+ Add F18-FZD options
in<8-OTHER>-> <BMW>
+ Add MED17.7.2 (ADAPTER) options in
<10-BOSH-ECU-ADAPTER>-> <BENZ>
+ Add EDC17.7.2 (ADAPTER) options in
<10-BOSH-ECU-ADAPTER>-> <BENZ>
+ Add EDC17.7.8 (ADAPTER) options in
<10-BOSH-ECU-ADAPTER>-> <BENZ>
+ Add EDC17CP46 (ADAPTER) options in
<10-BOSH-ECU-ADAPTER>-> <BENZ>
+ Add EDC17C45 (ADAPTER) options in
<10-BOSH-ECU-ADAPTER>-> <BMW>
+ Add EDC17C56 (ADAPTER) options in
<10-BOSH-ECU-ADAPTER>-> <BMW>
+ Add EDC17C50_Fxx (ADAPTER) options in
<10-BOSH-ECU-ADAPTER>-> <BMW>
+ Add MED17.3.5 (ADAPTER) options in
<10-BOSH-ECU-ADAPTER>-> <FIAT>
+ Add MED17.9.30 (ADAPTER) options in
<10-BOSH-ECU-ADAPTER>-> <KIA>
+ Add EDC17CP50 (ADAPTER) options in
<10-BOSH-ECU-ADAPTER>-> <HONDA>
+ Add MED17.8.3 (ADAPTER) options in
<10-BOSH-ECU-ADAPTER>-> <LANDROVER>
+ Add MEVD17.4.4 (ADAPTER) options in
<10-BOSH-ECU-ADAPTER>-> <PEUGEOT>
+ Add ME17.1.6 (ADAPTER) options in
<10-BOSH-ECU-ADAPTER>-> <VOLKSWAGEN>
VVDI PROG V4.8.7 Updated on Sep. 19^th, 2019
1.Free download link: https://mega.nz/#!itZURCbQ!8GoEieiNPpO3mKTXrMeBYgXJ3fHCoWcAgcMvhl5HQM8
2.Update info:
* This version does not need a firmware update
* Correction for BOSH ECU adapter read the BUGs
+ Add VVDI PROG user MUNUAL 4.8.7 version in the Doc folder
+ Add R7F701062 , R7F701064, R7F701067 options in
<2-MCU> -> <RENESAS-RH850>
+ Add for scenic (2007) options in <4-immobilizer> -> <for RENAULT>
+ Add E3 options in <5-dashboard > -> <for CHERY>
+ Add TIGGO5 (2014) options in <5-dashboard> -> <for CHERY>
+ Add 300 (2005) options in <5-dashboard> -> <for CHRYSLER>
+ Add SOUTHEAST-DX3 (2016) options in <5-dashboard> -> <Southeast>
+ Add FRM-SRS options in <8-other> -> <for BMW>

Learn more details about Xhorse VVDI PROG programmer V4.9.0, clear here: http://www.obdiitool.co.uk/wholesale/vvdi-prog-programmer.html
Source:http://blog.obdiitool.co.uk/vvdi-prog-update-free-download/

Quick Guide to Download and Update Vehicle Software for Foxwell NT530

If this is your first time to buy Foxwell NT530 scanner, the article will be a good choice for you to read. NT530 scanner is the updated version of NT520 pro, and it comes with no software as default, so it needs you to download the specific vehicle software from official website. Here share you the related download and update guide.


Requirements:
Windows PC
Foxwell NT530 multi-system scanner

Step-by-step guide:
Step 1: Visit official website: http://www.foxwelltech.us/product-detail-524.html and drag the page to the bottom
Then download Foxassist zip file

Step 2: Unzip the file and start installing the "Foxassist"
Step 3: Register and Sign in

Step 4: Connect the NT530 device with computer via USB cable
Select “Update” shows on your tool and press “Enter”

Step 5: The serial number will appear in the input box automatically
Then click “Activation” to continue

Step 6: Click “Download” and press “Enter” on NT530 scanner again

Step 7: When an update message shows “This product is a single-vehicle software product, and there is no vehicle software yet. It is necessary to reconfigure a vehicle software”.
Select the vehicle software you need-> click “Submit”-> “Update”



Step 8: Update in process, please wait patiently…
Please kindly notice:
1.Don’t press any button before update completes
2.Don’t disturb the USB connection during the process of update
3.Press [Enter] to enter the main menu when update completed

Finish!



For your information, here is the related Foxwell NT530 software download and update video:


Enjoy!

How to Solve CGDI BMW V3.1.0 “Software Signature Error”

A customer got trouble in CGDI BMW key programmer update, here is the problem:
I downloaded the newest CGDI prog BMW V3.1.0 from the official website, and I already installed it for my device, but when I wanted to login, a message prompted “Software signature error, please update”. I tried to update, it showed “this is the newest version, needn’t to upgrade”.




Solution from obdiitool.co.uk engineer:
Please uninstall the software and download by the following link.
CGDI_V3.1.0_Build_200103.7z: http://lixian.b.qq.com/AfqHFwHS02Q
Password: 8XVJ
Note: this download link is valid for 7 days, if you cannot download, please contact our customer service.

Tech support: www.obdiitool.co.uk


 Source:http://blog.obdiitool.co.uk/how-to-solve-cgdi-bmw-v3-1-0-software-signature-error/

2020 Xhorse VVDI Key Tool Max + VVDI Mini OBD Tool

VVDI Key Tool Max with Mini OBD tool Bluetooth adapter is the update version of VVDI Mini Key tool. This new Xhorse tool makes up for the lack of a display screen, will be used by more locksmiths.

What can VVDI Key Max do:
- Support smart card remote, super remote, super chip XT27A66
-Generate remote and smart key
-Generate transponder
-Transponder Clone
-Generate Remote
-Remote Clone
-OBD matching transponder/remote/smart card.
- Be connected to the dolphin XP-005 key cutting machine via Bluetooth to cut the key
-Enter the car directly using KEY MAX+ MINI OBD for matching. The entire process can be seamlessly connected without switching devices.
-Match the chip remote control for a wide range of car models
-Toyota H chip will be released first

Note: The port which is used to connect the programmer is reserved. After the expansion, the chip can be written start data, and the operation of the IC reading data is equivalent to the function of the tango.

Xhorse key tool Max display:





What can VVDI Mini OBD Tool do:
-Battery Programming
-Odometer Correction
-Steering Angle Calibration
-Key Code Learning
-EABS Programming
-Remote Manual Programming


What’s the advantage of VVDI Key Tool Max:
1.Its color display screen can be used as an external display of the numerical control machine to complete the operation of cutting between finger touch, so as to avoid the embarrassment of calling in during the operation of mobile phone.
2.All kinds of resources of the Key tool Max that are connected to the Internet can be shared and interacted, so you can learn how to open the video before you start it and have more confidence.
3.KEY TOOL MAX will also make it more convenient for manufacturers to intervene and support. Problems in use or in need of help can be solved more quickly.
4.The VVDI Mini OBD Tool works with key tool max, will make people feel more convenient.
Once you get the customer key, identify and generate the KEY -- cut the KEY -- get into the car and match again with the KEY TOOL MAX. The whole process is seamless, and there is no need to switch devices back and forth. Even the whole process will have operation guidance.

5.The KEY TOOL MAX makes up for the lack of a display screen in the VVDI mini key tool, and upgrades the old display on the phone to support a new generation of android display. VVDI mini key tool is positioned as the use of low-end users, that is, a small number of customers with XHORSE products are the most practical, while KEY TOO MAX can be a good link to CNC machines and other devices, which are more suitable for customers with more XHORSE products. Of course, its OBD function is required by all levels of customers, so it is aimed at a broader group.

Maybe someone will say there are many functions of VVDI key tool max are same as vvdi mini key tool, is it necessary to buy?

In my opinion, just like the continuous development of mobile phones, mobile phones will be constantly updated and we will buy them according to our own needs. The old machines can be used but the new ones will have more functions. Besides that, it’s a cost-effective tool in the market.

To sum up, XHORSE KEY TOOL MAX is a new product of Xhorse positioned as a mid-end machine. It's not a replacement for the VVDI KEY TOOL and Mini key tool.


Source:http://blog.obdiitool.co.uk/xhorse-vvdi-key-tool-max-any-good/

KTMflash Reprogram VW Magotan TC1766 MICRO

Question: Is it possible to use KTM Flash ECU programmer to read VW Magotan data according to the chip model?

Answer: Yes. KTMflash ECU programmer with gearbox power upgrade tool can read chip data, read & write ECU data, read transmission data, etc at a high speed.

Question: How to reprogram?
Answer: It’s easy to use, just follow the following steps:
Step 1: Connect KTMFlash ECU programmer, gearbox power upgrade tool, VW Magvotan ECU and computer well
Step 2: Open software, select the corresponding ECU to enter reprogramming mode

Step 3: When read data successfully, just save it



Question: Besides TC1762/TC1766 MICRO (1504KB), which Infineon chip models can read the BOOT mode by KTMflash ECU Programmer?
Answer: Look at the chip models list below:
Infineon: TC1762/TC1766 EEPROM (32KB)
Infineon: TC1792/TC1796 MICRO (2048KB)
Infineon: TC1796 MICRO+EXT (4096KB/6144KB)
Infineon: TC1796 EXT (2048KB/4096KB)
Infineon: TC1796 EEPROM (128KB)
Infineon: TC1792 EEPROM (64KB)
Infineon: TC1738/TC1767 MICRO (2048KB)
Infineon: TC1738/TC1767 EEPROM (64KB)
Infineon: TC1797 MICRO (4096KB)
Infineon: TC1797 MICRO+EXT (6144KB/8192KB)
Infineon: TC1797 EXT (2048KB/4096KB)
Infineon: TC1797 EEPROM (64KB)
Infineon: TC1724/TC1728 MICRO (1536KB)
Infineon: TC1724/TC1728 EEPROM (64KB)
Infineon: TC1782/TC1784 MICRO (2560KB)
Infineon: TC1782/TC1784 EEPROM (128KB)
Infineon: TC1793/TC1798 MICRO (4096KB)
Infineon: TC1793/TC1798 MICRO+EXT (6144KB/8192KB)
Infineon: TC1793/TC1798 EXT (2048KB/4096KB)
Infineon: TC1793/TC1798 EEPROM (192KB)

Tech support: http://www.obdiitool.co.uk/wholesale/latest-ktm-flash-ecu-programmer.html
Source:http://blog.obdiitool.co.uk/ktmflash-reprogram-vw-magotan-tc1766-micro/

Foxwell NT680 Pro vs. Foxwell NT680

Foxwell NT680 Pro is the newest full-system multi-brand diagnosis & service reset tool for both OBDI and OBDII vehicles till 2018 or 2019. It has more functions than NT680 scanner.

Foxwell NT680 Pro vs. Foxwell NT680:

	Fxowell NT680	Foxwell NT680 pro
Image
Target users	workshops, technicians and enthusiasts	workshops, technicians and enthusiasts
Touch screen	4.3″TFT color display	4.3″TFT color display
External Power	8-18 Volts powered by vehicle battery	8-18 Volts powered by vehicle battery
Full – system diagnosis	Yes (ABS, airbags, instrument cluster, etc.)	Yes (ABS, airbags, instrument cluster, etc.)
OBD diagnosis Coverage	Up to 2018/ 2019 year, 60 American, Asian and European vehicle makes (cars, SUVs, minivans, light-duty trucks)	Up to 2018/ 2019 year, 60 American, Asian and European vehicle makes (cars, SUVs, minivans, light-duty trucks)
Oil Light/Service Reset	Yes	Yes
EPB	Yes	Yes
Engine	Yes	Yes
A/T	Yes	Yes
ABS	Yes	Yes
SRS	Yes	Yes
A /C	Yes	Yes
EPS	Yes	Yes
BRT		Yes
DPF		Yes
TPS/TBA		Yes
SAS		Yes
CVT		Yes
Gear Learning		Yes
TPMS		Yes
Odometer		Yes
Injector Coding		Yes
Language	English, French, German, Polish, Russian, Spanish and much more
Update	Lifetime free update	Lifetime free update

Price:
1.Foxwell NT680 pro OBD2 scanner: £352.00
http://www.obdiitool.co.uk/wholesale/foxwell-nt680pro-all-system-obd2-scanner.html
2.Foxwell NT680 All Systems Scanner: £179.00
http://www.obdiitool.co.uk/wholesale/foxwell-nt680-all-system-obd2-scanner.html

Similarities:
1.Foxwell NT680 and NT680Pro has the same diagnosis function:
– Can Find Troubles More Accurately.
– Shows live vehicle sensors data in text and graph formats
– Merges interactive live sensor graphs for easy and intuitive diagnosis
– Records and playbacks your data-logs to catch intermittent failures
– Identifies cars quickly and easily with one-key VIN reading
– Extremely easy to use with clearly arranged keypad, menu-driven operation and shortcuts

2.They also have the same full package:


In summary, Foxwell NT680 pro is more expensive than NT680 scanner, but it has more functions while NT680 cannot support: BRT, DPF, TPS/TBA, SAS, CVT, Gear Learning, TPMS, Odometer and Injector Coding.


How to update Foxwell NT680 pro OBD2 scanner?
Before updating your scanner, please make sure that you have created a Foxwell ID and you have activated your scanner.

l.Launch the update tool FoxAssist by double clicking the desk Icon and login with your Foxwell ID and password.
FoxAssist download: http://www.foxwelltech.us/support-tools.html

2.Connect the scanner to the PC with the USB cable provided.
3.Select Download then all the updates applicable to your tool display Click Update button to start updating
Depending on the file size of the update packaging, the update time varies from one model to another.

That’s all!
Source:http://blog.obdiitool.co.uk/foxwell-nt680-pro-user-manual/