Update info: Fix the bug that cannot get the verify code from email when register
Special functions:
-Immobilizer key programming (Don't need IMMO card)
-Module (Re) programming: ECM, TCM, Blank TCM, Blank TCM, ABS, VDC etc. Very fast!
Don’t need password!
-Configuration
Vehicle coverage: Support diagnosis, key programming, IMMO for Nissan, INFINITI, GTR (from 1996 to 2020) and RENAULT (only for some car models, there is no specific model so far). No need programming card, IMMO card and password. 90% of OBD vehicles on the market can perform diagnostic functions (Most of old cars before year 2005 cannot diagnose by SVCI ING)
Note: You can connect SVCI ING device to computer via USB cable or Bluetooth for using.
Fyi
Learn more details about SVCI ING NISSAN diagnostic tool such as how to install/ use the BAOCHI Cloud software, register account, bind or unbind etc. Please refer to this article: http://blog.obdiitool.co.uk/svci-ing-replace-consult-3-plus/
Here have collected some SVCI J2534 Mazda diagnostic tool problems customer gave feedbacks and offered the corresponding solutions. Problem 1: I’m sure the PC has connected to the Internet and can work well. I download the SVCI J2534 software to update V118.03 and install successfully. But when I try to use “Module program PCM”, it still appears “No response from the PCM” as shown in the following picture. Why it cannot work? There is an error message with “No password allowed” for IDSLoader, but I can boot the IDS.
Solution: You need to do this function online. Problem 2: When I run IDS Mazda software, a message pops up “An active IDS software license is found and is required for vehicle communications” as shown below.
Solution: Please watch the following video carefully and operate step by step, and you need to open the software by IDS.
Problem 3: It prompts “Excepcion no identificada, Numero de erro: 0x80040702…” when I use svci j2534 device.
Problem 4: There is something wrong with the IDSLoader. I make sure the button of my SVCI J2534 is depressed and green light is flashing, but it cannot work normally.
Solution: If the indication light is on and the software shows error, that means the device is damaged and should send back to your dealer to repair.
Customer Problem: When I install Kess v2 ksuite V2.53 on Win 7 32 bit, an error message appears on the screen with the words “an error occurred while trying to copy a file: Erro de dados (erro por redundancia ciclica). Click retry to try again, ignore to skip this file (not recommended), or abort to cancel installation.” as below.
Obdiitool.co.uk engineer replied:
Please uninstall the software and download by the following free link:
What is XTOOL TS100 Sensor? XTOOL TS100 sensor is a powerful tire pressure monitoring sensor repair tool. It’s suitable for 315& 433MHz, can service 98% TPMS of North American, European and Asian vehicles without relearning. Effectively avoids accidents caused by tire aging/air leakage and blowout.
XTOOL TS100 433&315MHz Sensor Outlook:
-Built in high quality battery with lower weight
-Built in sensor
How to use XTOOL TS100 TPMS Sensor?
It’s very easy to install and use, view the connection diagram as below.
Using tips:
1.Don’t install programmed TPMS sensor in damaged wheels.
2.The TPMS sensor assemblies are replacement or maintenance parts for vehicles that have a factory installed TPMS.
3.Make sure to program the sensor by XTOOL sensor programming tools for your specific vehicle make, model and year before installation.
4.In order to guarantee optimal function, the sensor may only be installed with original valves and accessories provided by Autel.
5.Upon completion of installation, test the vehicle TPMS systems using procedures described in the original manufacturer' s user guide to confirm proper installation.
6.Each time a tire is serviced or dismounted, or if the sensor is removed or replaced, it is mandatory to replace the rubber grommet, washer, nut and valve core with our parts to ensure proper sealing. It is mandatory to replace the sensor if it is extremely damaged.
Installation guide: -Loose the tire: Remove the valve cap and core and deflate the tire.
-Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. -Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve. -Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw. -Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
Note: These special functions are not for all car models, if you are confused, please provide your car model to your dealer to check for you.
3.APP Store:
In this menu you can check the vehicle, special function and IMMO vehicle coverage
4.Settings:
Here you can check the system info, units, search engine, run mode and select language you desire such as English, Italian, German, Russian, French, Spanish, Polish, Traditional Chinese and more.
5.Video Function:
Press the video icon to record the operation ect.
Then you can find the video from this path: HUMZOR main menu-> Other-> Data Manage-> Video
Video demo:
FYI
There are three version for sale,just have different power adapter, please choose the correct one when you order:
-Humzor NexzDas UK Version
-Humzor NexzDas EU Version
-Humzor NexzDas US version
In a word, Humzor NexzDAS Pro is a professional cost-effective full system diagnostic tool, with the 10.1 inch tablet, it’s easy to operate for wide cars.
What car models are supported by Lonsdor JCD 2-in-1 cable?
It supports Jeep, Chrysler, Dodge, Fiat and Maserati.
What’s the advantage of JCD 2-in-1 multifunctional programming cable?
-Avoid dismantling too many parts, make the key programming easier
--Compatible with Lonsdor K518ISE/ K518S and more key programmers and diagnostic devices on the market.
-Flexible selecting of the probe or the connector according to vehicle models.
-3.2 meters length is plentiful for vehicle models with start module based in trunk.
-More and more new models with the same IMMO will be applied in the near future
How to use new Lonsdor JCD 2-in-1 programming cable?
Connect K518 or other key programmers with car OBD via the any of JCD 2-in-1 cable depends on the car model
The NT510 Elite is a special tool for BMW engines. However, it can be used as a universal OB1/OBD2 and EOBD scan tool.
It has the same function as foxwell NT530. For the more advanced features and full system scan, this tool is compatible with BMW engines from older 1987-1996 cars to brand new models.
PROS:
-Professional Scan tool for half the price
-Advanced Features
-SD memory card
-Updateable
-ECU programming
CONS:
-A lifetime of free updates is not a lifetime
-Only Best for BMW engines
Foxwell NT650 Elite:
Nt650 Eliteis an automotive multi-functional scan tool. You can use it to reset the oil light, perform EPB service, fix the steering sensor and do more special function.
The vehicle coverage is over 52 manufacturers.
PROS:
-Bi-directional testing
-Advanced features and functions
-Wide coverage
-Good value for the money
CONS:
-Not every feature works for every engine
Foxwell NT301:
NT301 is compatible with all the EOBD/OBD2 cars incl. SUVs, light-duty trucks, minivans and even hybrids sold worldwide.
PROS:
-Accurate Readings
-Smart Design
-Convenient to Use
-Lifetime Updates
CONS:
-Cannot read ABS codes
-Cannot help with Oil Service Reset
Foxwell GT60 PLUS:
GT60 PLUS is the update version of Foxwell GT80 PLUS,Covers over 70 car makes,Compatible with the latest 2018/2019 models, Compatible with both OBDI and OBDII cars, SUVs, minivans, light-duty trucks sold worldwide.
