Foxwell NT510 Elite has the same function as NT530. Here have collected some frequently asked questions about what car can do or cannot do by NT510 elite scanner.
Q: Does NT510 Elite support battery registration for 2011 Audi Q5?
A: Yes
Q: Can I use NT510 Elite scanner on my 2004 Range Rover to do these functions: actuate/activate/ clear error codes and reset for the air suspension system?
A: Yes, please check the chart below.
Q: I want to change battery management adaptation, to input the full BEM code/serial number, brand, and capacity in Ah? Does foxwell nt510 elite have this function?
Here is the detailed car models I need:
-Audi A3 2010, 2.0 TDI Sport with automatic start/stop technology. Current battery is a Varta AGM 096 battery (OEM original)
-Audi A3 2017 1.0 TFSI SE Technic with automatic start/stop. I can’t recall if the battery is AGM or EFB but it is a smaller battery than the 2.0 TDI
-VW Polo 2015 1.4 Petrol with automatic start/stop. If I recall correctly this has an AGM battery.
-VW Golf 2015 2.0 TDI BlueMotion with automatic start/stop. It is fitted with an AGM 096.
A: Yes, NT510 Elite supports the battery configuration.
Q: Will NT510 Elite work with a 2013 Hyundai Elantra to relearn and reprogram TPMS? Also will I be able to add a 2015 Honda CR-V download the road?
A: It supports wheel ID writing, but doesn’t support reprogram TPMS.
Q: Does NT510 Elite support the functions as below for 2013 Honda Accord?
- Read the battery sensor.
- Read the steering torque sensor
- Read the steering angle sensor.
- Read the EPS motor torque sensor
-Read the individual wheel speed sensors
- Read alternator data.
A: Yes.
Q: Can NT510 Elite do the following functions for Honda Odyssey 2011 and Honda HRV 2016?
Reset alert light, oil life light, reset ABS/VSA/slide door after battery dead or battery replacement, and programming the TPMS sensors when I swap tires between summer and winter?
A: Except oil life light needs to reset manually, other functions are supported.
Q: Can NT510 elite scanner reset the throttle position sensor values on my 2007 Civic DX-G (with AC)?
A: Yes.
Q: Can I use NT510 elite to register new agm battery on 2014 bmw m6 and add 2012 Land Rover Range Rover supercharged 5.0?
A: Yes.
Q: Will NT510 elite reset a 2015 Maserati Ghibli Maintenance light?
A: Yes.
Q: I use foxwell nt510 elite to do my 2003 Discovery 2, but it doesn’t recognize the VIN and manual mode says VIN is invalid and ABS says no communications to SLABS even though my RWS Amigo sees it and clears codes… also cannot power-bleed with it…
A: NT510 elite doesn’t support VIN identification for 2003 Land Rover car models. You only can enter the function manually. Please confirm whether the Land Rover software has been updated to the newest version, and then confirm the path: LandRover--Manual selection--Discovery--1998-2004—ABS. If the path is same but still cannot solve “ABS says no communication” error, check the ABS failure light on the car is on or not.
To be continued…
https://www.obdiitool.co.uk/wholesale/foxwell-nt530-multi-system-scanner.html
Source:
http://blog.obdiitool.co.uk/foxwell-nt510-elite-system-scanner-faq/
没有评论:
发表评论